Bike of the Day 5/15/23
Bike of the Day 5/15/23
General Info
Additional Info
General Info
Model Year
Model Year
2004
Model Year:
Model Year
2004
Brand
Suzuki
Brand:
Suzuki
Model
RM
Model:
RM
Engine Size
125
Engine Size:
125
Engine Type
2-Stroke
Engine Type:
2-Stroke
Parts
Brand
Model
Additional info
Parts
Graphics
Other
Melo Design Co. Millsaps Replica
Graphics:
Other.
Misc: Melo Design Co. Millsaps Replica
Plastic
Acerbis
Plastic:
Acerbis
Handlebar
Pro Taper
Handlebar:
Pro Taper
Grips
Pro Taper
Grips:
Pro Taper
Clutch Lever
Pro Taper
Clutch Lever:
Pro Taper
Seat
Guts
Seat:
Guts
Footpegs
Other
2022 KX450 Pegs
Footpegs:
Other.
Misc: 2022 KX450 Pegs
Exhaust
Bill's Pipes
Exhaust:
Bill's Pipes
Piston
Vertex
Piston:
Vertex
Rims
Excel
Rims:
Excel
Brake Rotors
Galfer
Brake Rotors:
Galfer
Additional Info
2004 RM 125 purchased about 2 years ago.
All the work besides powder coating and vapor blasting was done by myself.
I did a complete engine teardown and replaced all bearings, gaskets, and seals with all OEM stuff and installed a vertex piston.
All chassis bearings replaced and greased.
Engine and carb was vapor blasted and I had the ignition/clutch covers and hubs powder coated with prismatic powders, silver graphite.
Graphics are done by Melo Design Co to match Davi Millaps 04' factory bike.
Galfer oversized front rotor, powder coated hubs, Excel rims and spokes.
Bills works pipe and silencer.
"works nickel" engine bolt kit from ebay seller Fastmetric
Mika Metals 53 tooth rear sprocket, 12 tooth front, & pro taper gold chain
Moto Tape gripper frame tape. I purchased kx450 ones and cut to fit for more coverage.
.46 kg front springs, 5.4kg rear spring for 210lbs. rider. New oem seals, bushings, etc.
RC bend Pro Taper bars.
Guts team RCH seat cover.
Additional Info:
2004 RM 125 purchased about 2 years ago.
All the work besides powder coating and vapor blasting was done by myself.
I did a complete engine teardown and replaced all bearings, gaskets, and seals with all OEM stuff and installed a vertex piston.
All chassis bearings replaced and greased.
Engine and carb was vapor blasted and I had the ignition/clutch covers and hubs powder coated with prismatic powders, silver graphite.
Graphics are done by Melo Design Co to match Davi Millaps 04' factory bike.
Galfer oversized front rotor, powder coated hubs, Excel rims and spokes.
Bills works pipe and silencer.
"works nickel" engine bolt kit from ebay seller Fastmetric
Mika Metals 53 tooth rear sprocket, 12 tooth front, & pro taper gold chain
Moto Tape gripper frame tape. I purchased kx450 ones and cut to fit for more coverage.
.46 kg front springs, 5.4kg rear spring for 210lbs. rider. New oem seals, bushings, etc.
RC bend Pro Taper bars.
Guts team RCH seat cover.
5/15/2023 6:38am
View replies to: 2004 RM125
Comments